School over and now?
Your apprenticeship or dual study programme at Behringer!
Are you looking for the perfect start to your career after leaving school? Are long-term perspectives just as important to you as opportunities for individual further training? Then an apprenticeship or study program at Behringer could be the right choice for your future. As a recognized apprenticeship company, Behringer offers interesting, diverse and, above all, future-proof apprenticeships and courses of study in the technical and commercial fields.
According to the motto "From apprentices for apprentices", we will soon be showing you insights into the everyday life of our apprenticeship or our dual studies at Behringer. Step by step, we will introduce you to the seven different apprenticeships and courses of study individually. This will give you a good overview of what it's like to work at Behringer.
Video: Your apprenticeship at Behringer
The long-established family company Behringer from Kirchardt, centrally located between the large district towns of Bad Rappenau, Eppingen and Sinsheim, offers a wide range of apprenticeships and study.
Or are you still at school and don't know where to go afterwards? Gain experience and get a deep insight into our exciting everyday working life during a school internship such as OiB, BORS and BOGY. This gives you the opportunity to get to know our different apprenticeships, study programmes and us.
Fit in terms of education
Qualified training is the foundation for a successful career. This is written in capital letters at Behringer. Our training quota of almost 10% is remarkable.
As we aim to secure our personnel needs in the long term, the training spectrum is extensive and the chance of being taken on after the training is excellent. We convey the training content in a practice-oriented approach and place great value on teamwork.
Electronics technician (m/f/d) specialising in industrial engineering
Electronics technicians for industrial engineering are used for the electrical installation of our sawing machines as well as within our control cabinet construction and sometimes accompany the commissioning of our products.
Main focus of the education:
- Pass through all departments in mechanical engineering, e.g. technical office, logistics, quality assurance, electrical assembly
- Getting to know our products - from the design to the finished sawing machine
- Learning and carrying out the assembly, installation up to the commissioning of sawing machines and systems
- Construction and wiring of control cabinets according to circuit diagrams
- Troubleshooting and fault rectification with the aid of circuit diagrams
Your profile:
- Mathematics, physics and logical thinking are no problem for you
- The construction of complex electronic circuits inspires you
- Good secondary modern school diploma
- Ability to work in a team, careful working method, self-reliance
We offer:
- High take-over rate
- Convenient working hours (35h week)
- Training and further education opportunities
- Regular inter-departmental trainee projects
- Modern working environment using the latest technologies
- Practice-oriented induction by training supervisors
- Collegial working atmosphere with flat hierarchies
Duration of the education:
- Duration: 3.5 years
Further education opportunities:
- Technician qualification
- Master craftsperson training
Foundry mechanic (m/f/d)
Foundry mechanics produce castings in single pieces or small series with the help of models. In our state-of-the-art iron foundry, training is a top priority.
Main focus of the education:
- Passing through all departments in the foundry and our mechanical production
- Getting to know our products - from planning to the finished cast part
- Learning the essential skills of the profession:
- (1) Preparation of various moulding materials
- (2) Making sand cores
- (3) Provide and prepare models
- (4) Charge melting furnaces and analyse the molten metal structures
- (5) Mould and lay out models
- (6) Check the quality of the castings
Your profile:
- You have mechanical skills and a good sense of spatial awareness
- You have a basic level of physical fitness
- Logical thinking does not cause you any problems
- You have a good secondary school leaving certificate
- Careful and independent way of working, ability to work in a team
We offer:
- High take-over rate
- Convenient working hours (35h week)
- Training and further education opportunities
- Modern working environment using the latest technologies
- Practice-oriented induction by training supervisors
- Collegial working atmosphere with flat hierarchies
Duration and course of education:
- Duration: 3.5 years
- Passing through all departments in the foundry and our mechanical production
- Vocational school as block instruction at the WMS Stuttgart - Bad Cannstatt, including accommodation in the boarding school / dormitory there.
Further education opportunities:
- Foundry technician
- Master craftsperson training
Industrial clerks (m/f/d)
Industrial clerks are involved in all commercial processes within the company. Areas of application are procurement, work preparation, sales, financial accounting, human resources and service.
Main focus of the education:
- Pass through all commercial departments, e.g. purchasing, sales, accounting, customer service, work preparation, reception
- Getting to know the products of all departments, also in the production area
- Processing of commercial tasks (e.g. preparation of offers and invoices, placing orders) with the help of the latest IT programmes such as MS Office, SAP R/3 and Outlook
Your profile:
- Interest in commercial processes of an industrial company
- Ability to think logically and in an integral way
- Organisational and communication skills
- Secondary modern school diploma or (technical) high school graduation
- Good knowledge of German and English language
We offer:
- High take-over rate
- Convenient working hours (35h week)
- Training and further education opportunities
- Regular inter-departmental trainee projects
- Modern working environment using the latest technologies
- Practice-oriented induction by training supervisors
- Collegial working atmosphere with flat hierarchies
Duration of the education:
- Duration: 3 years
Further education opportunities:
- Bachelor professional
- Master professional
Industrial mechanic (m/f/d) in the field of machine/system technology
Our industrial mechanics receive profound, practice-oriented occupational training in our company. They mainly carry out the assembly of subassemblies or sawing machines and systems.
Main focus of the education:
- Training department: Machine assembly
- Pass through various specialist departments such as parts production, work preparation, system engineering, technical office, BTZ technology centre, foundry and warehouse
- Getting to know our products - from the design to the finished sawing machine
- Assembly of subassemblies and machines: from pre-assembly units to special machines
Your profile:
- Craftsmanship and technical understanding
- Interest in manual and machine work
- Very good secondary school leaving certificate or secondary modern school leaving certificate
- Ability to work in a team and enjoy working with mechanics
We offer:
- High take-over rate
- Convenient working hours (35h week)
- Training and further education opportunities
- Regular inter-departmental trainee projects
- Modern working environment using the latest technologies
- Practice-oriented induction by training supervisors
- Collegial working atmosphere with flat hierarchies
Duration of the education:
- Duration: 3.5 years
Further education opportunities:
- Technician qualification
- Master craftsperson training
Mechatronics technician (m/f/d)
Mechatronics technicians combine the occupational profiles of industrial mechanics and electronics technicians and thus find their way in both worlds. The tasks after apprenticeship range from assembly and commissioning in-house to service assignments at national and international level.
Main focus of the education:
- Pass through all departments in mechanical engineering, e.g. technical office, logistics, quality assurance, electrical assembly
- Getting to know our products - from the design to the finished sawing machine
- Learning and carrying out electrical assembly, installation through to commissioning of saws and saw systems
- Learning and carrying out the mechanical assembly of subassemblies up to the acceptance of the sawing machine
- Assembly and wiring of control cabinets according to circuit diagrams
- Installation of pneumatic and hydraulic systems
Your profile:
- Craftsmanship and enthusiasm
- You are enthusiastic about the construction of complex electronic & mechanical systems
- Mathematics, physics and logical thinking are no problem for you
- Good secondary modern school certificate
- Ability to work in a team, careful working method, self-reliance
We offer:
- High take-over rate
- Convenient working hours (35h week)
- Training and further education opportunities
- Regular inter-departmental trainee projects
- Modern working environment using the latest technologies
- Practice-oriented induction by training supervisors
- Collegial working atmosphere with flat hierarchies
Duration of the education:
- Duration: 3.5 years
Further education opportunities:
- Technician qualification
- Master craftsperson training
Technical product designer (m/f/d) in the field of machine/system design
Technical product designers are significantly involved in the development of new products as well as the implementation of customer requirements / special design. They create components and assemblies for our sawing machines and systems in cooperation with our engineers and technicians and accompany the corresponding manufacturing and assembly process.
Main focus of the education:
- Creating design drawings and technical sketches
- Creation of 3D construction models (Autodesk Inventor)
- Preparation of supporting documents (drawings, parts lists, production and assembly documents, documentation)
- Getting to know the operational processes through intensive inter-departmental training blocks
- Collaboration in ongoing projects as an integral part of the team
Your profile:
- Technical interest and understanding
- Good spatial imagination
- Ability to work in a team and good communication skills
- Secondary modern school diploma or (technical) high school graduation
- Good knowledge of mathematics and technology
We offer:
- High take-over rate
- Convenient working hours (35h week)
- Training and further education opportunities
- Regular inter-departmental trainee projects
- Modern working environment using the latest technologies
- Practice-oriented induction by training supervisors
- Collegial working atmosphere with flat hierarchies
Duration of the education:
- Duration: 3.5 years
Further education opportunities:
- Mechanical engineering technician
- Technical business economist
Machinist (m/f/d)
Machinists are employed within our mechanical engineering department in assembly and machining. Generally 3 apprenticeship places are available per year.
Main focus of the education:
- Pass through all departments in mechanical engineering, e.g. technical office, logistics, quality assurance, electrical assembly
- Getting to know our products - from the design to the finished sawing machine
- Manufacturing of components and assemblies
- Programming and monitoring of machine tools
- Monitoring and planning of the production processes
Your profile:
- Mathematics and logical thinking are no problem for you
- Pleasure in working with machines
- Very good secondary school leaving certificate or secondary modern school leaving certificate
- Ability to work in a team, careful working method, self-reliance
We offer:
- High take-over rate
- Convenient working hours (35h week)
- Training and further education opportunities
- Regular inter-departmental trainee projects
- Modern working environment using the latest technologies
- Practice-oriented induction by training supervisors
- Collegial working atmosphere with flat hierarchies
Duration and course of education:
- Duration: 3.5 years
- 6 school days per month
- Inter-company trainings of 1-week duration via the Chamber of Crafts to deepen the training content
Further education opportunities:
- Technician qualification
- Master craftsperson training
Dual studies at Behringer
We value our long-standing cooperation with the Cooperative State University in Mosbach. During the three-year study programme, the theoretical and practical phases alternate regularly.
The academic content learned during the theoretical phase at the DHBW Mosbach is deepened by the students during the practical phase at the Kirchardt headquarters. Both the company and the graduate benefit from this.
Applied Computer Science (B. Eng.)
The Applied Computer Science degree programme offers a profound technical basic education and focuses on software engineering and application development, especially in the second and third years of the study. Students also work strongly on projects during the theory phases and deepen their understanding of the study content through direct application. Students acquire numerous core areas of computer science at the Cooperative State University. These include, for example, algorithms and data structures, operating systems, databases and programming languages.
Main focus of the education:
- Varied training through the alternation of theoretical and practical phases in cooperation with the DHBW Mosbach
- Teaching the basics of software, electrical and automation engineering
- Collaboration on exciting projects using modern software architecture
- Handling own tasks and projects in the area of the digital future
Your profile:
- You are interested in technology and computer science
- First programming experience is an advantage
- Good to very good (technical) high school graduation
- Careful way of working, independence, good German & English skills
We offer:
- High take-over rate
- Convenient working hours during the study (35h week)
- Training and further education opportunities
- Regular inter-departmental trainee projects
- Modern working environment using the latest technologies
- Practice-oriented induction by training supervisors
- Collegial working atmosphere with flat hierarchies
Course of studies and duration:
- Block training in the company or studies at the dual university
- Duration: 3 years / 6 semesters
- Practical phases with company training plan and projects
- Degree: Bachelor of Engineering
Electrical Engineering (B. Eng.)
As a Bachelor of Engineering in Electrical Engineering, you will be significantly involved in the new and further development of our sawing machines and systems, as well as putting complex customer requests into practice. As automation is increasingly in the foreground, exciting and varied tasks await you.
Main focus of the education:
- Pass through all departments in mechanical engineering, e.g. technical office, logistics, quality assurance, electrical assembly
- Getting to know our products - from the design to the finished sawing machine
- Varied training through the alternation of theoretical and practical phases in cooperation with the DHBW Mosbach
- Imparting comprehensive specialist knowledge in the field of electrical engineering, with a focus on automation and drive technology
- Collaboration on exciting projects and varied tasks
Your profile:
- Mathematics, physics and logical and analytical thinking are your strengths
- You have an interest in technical contexts and processes
- Good to very good (technical) high school graduation
- Ability to work in a team, perseverance, independence and flexibility
We offer:
- High take-over rate
- Convenient working hours during the study (35h week)
- Training and further education opportunities
- Regular inter-departmental trainee projects
- Modern working environment using the latest technologies
- Practice-oriented induction by training supervisors
- Collegial working atmosphere with flat hierarchies
Course of studies and duration:
- Block training in the company or studies at the dual university
- Duration: 3 years / 6 semesters
- Practical phases with company training plan and projects
- Degree: Bachelor of Engineering
Mechanical Engineering (B. Eng.)
Graduates of this degree create special designs according to customer requirements and are significantly involved in the new and further development of our machines and systems. Furthermore, they are in constant contact with the production areas and support service and sales for technical questions.
Main focus of the education:
- Getting to know the operational processes through intensive inter-departmental training blocks
- Teaching of basic knowledge in the field of mechanical engineering and the industrial manufacturing processes
- Familiarisation with engineering tasks in the area of design and production
- Creation of 3D construction drawings
- Varied training through the alternation of theoretical and practical phases in cooperation with the DHBW Mosbach
Your profile:
- Mathematics and physics are no problem for you
- Interest in designing and developing complex sawing systems
- Good to very good (technical) high school graduation
- Ability to work in a team, careful working method, self-reliance
We offer:
- High take-over rate
- Convenient working hours during the study (35h week)
- Training and further education opportunities
- Regular inter-departmental trainee projects
- Modern working environment using the latest technologies
- Practice-oriented induction by training supervisors
- Collegial working atmosphere with flat hierarchies
Course of studies and duration:
- Block training in the company or studies at the dual university
- Duration: 3 years / 6 semesters
- Practical phases with company training plan and projects
- Degree: Bachelor of Engineering
Mechatronics (B. Eng.)
In the Bachelor of Engineering Mechatronics degree programme, content from mechanical engineering, electrical engineering and information technology is taught in equal parts. This combination provides you with interdisciplinary knowledge and skills to develop and plan complex mechatronic systems. With the growing focus on automation, you can always expect new exciting and varied challenges.
Main focus of the education:
- Getting to know the operational processes through intensive inter-departmental training blocks
- Teaching of basic knowledge in the field of mechanical engineering and the industrial manufacturing processes
- Familiarisation with engineering tasks in the area of design and production
- Acquisition of comprehensive specialist knowledge in the field of mechatronics, with a focus on automation and drive technology
- Varied training through the alternation of theoretical and practical phases in cooperation with the DHBW Mosbach
Your profile:
- Mathematics, physics as well as logical and analytical thinking are your strengths
- You are interested in technical contexts and processes
- Good to very good (technical) university entrance qualification
- Ability to work in a team, perseverance, independence, careful working methods and flexibility
- Ability to work in a team, careful working method, self-reliance
We offer:
- High take-over rate
- Convenient working hours during the study (35h week)
- Training and further education opportunities
- Regular inter-departmental trainee projects
- Modern working environment using the latest technologies
- Practice-oriented induction by training supervisors
- Collegial working atmosphere with flat hierarchies
Course of studies and duration:
- Block training in the company or studies at the dual university
- Duration: 3 years / 6 semesters
- Practical phases with company training plan and projects
- Degree: Bachelor of Engineering
International Technical Sales Management (B. Eng.)
Graduates of this course market our technically complex sawing machines and systems. This requires both a commercial and an engineering background. They are in permanent contact with our customers in the development of individual solution concepts and represent our company at trade fairs at national and international level.
Main focus of the education:
- Varied training through the alternation of theoretical and practical phases in cooperation with the DHBW Mosbach
- Getting to know our products - from the design to the finished sawing machine
- Acquisition of interdisciplinary core competences
- Learn how to communicate with the customer - recognise problems and work out solutions in order to be able to fulfil the customer's expectations.
- Processing of tasks with the aid of the latest IT programmes such as MS Office, SAP R/3, SAP Cloud for Customer
Your profile:
- Mathematics, technology and English are no problem for you
- You have an enthusiasm for mechanical engineering and a high motivation to deal with technical and business contexts
- Good to very good (technical) high school graduation
- Ability to work in a team and strong communication skills
We offer:
- High take-over rate
- Convenient working hours during the study (35h week)
- Training and further education opportunities
- Regular inter-departmental trainee projects
- Modern working environment using the latest technologies
- Practice-oriented induction by training supervisors
- Collegial working atmosphere with flat hierarchies
Course of studies and duration:
- Block training in the company or studies at the dual university
- Duration: 3 years / 6 semesters
- Practical phases with company training plan and projects
- Degree: Bachelor of Engineering
International Production and Logistics (B. Eng.)
The study programme International Production and Logistics is part of industrial engineering and offers a technical basic education in the first three semesters. From the fourth semester onwards, the study content focuses on specific areas such as international logistics, production systems and human resource management as well as business information systems. The students also work strongly on projects during the theory phases and deepen their understanding of the study content through direct application.
Main focus of the education:
- Varied training through the alternation of theoretical and practical phases in cooperation with the DHBW Mosbach
- Teaching the basics of international logistics, production systems and personnel and quality management
- Collaboration on exciting projects using
- Handling own tasks and projects
Your profile:
- You are interested in technology and economy
- Good to very good (technical) high school graduation
- Careful way of working, independence, good German & English skills
We offer:
- High take-over rate
- Convenient working hours during the study (35h week)
- Training and further education opportunities
- Regular inter-departmental trainee projects
- Modern working environment using the latest technologies
- Practice-oriented induction by training supervisors
- Collegial working atmosphere with flat hierarchies
Course of studies and duration:
- Block training in the company or studies at the dual university
- Duration: 3 years / 6 semesters
- Practical phases with company training plan and projects
- Degree: Bachelor of Engineering
We offer school students and university students the opportunity to get to know everyday working life at Behringer with an internship, holiday job or working student activity. You can also get a taste of our apprenticeships as part of a school internship such as OiB, BORS and BOGY and thus find out whether you like the activities of the job profile.
We also offer exciting topics for a technician's, bachelor's or master's thesis and are also very happy to receive your own ideas and suggestions for topics. You will then accompany the selected project from the theoretical elaboration to the practical implementation.
Bildungsmesse Heilbronn 2023
Am 16. Und 17. Juni 2023 findet wieder die Bildungsmesse Heilbronn statt.…
- ausbildung
- berufsausbildung
- dualeausbildung
- studium
- dualesstudium
- bachelorstudium
- studiengang
- studiengänge
- dualestudiengänge
- auszubildende
- ausbildungsbetrieb
- dhbw
- dualehochschule
- dualehochschulemosbach
- dhbwmosbach
- elektroniker
- elektriker
- kauffrau
- kaufmann
- industriekauffrau
- industriekaufmann
- technischerproduktdesigner
- technischerzeichner
- zerspanungsmechaniker
- gießereimechaniker
- industriemechaniker
- mechatroniker
- maschinenbau
- elektrotechnik
- technischeproduktdesignerin
- technischezeichnerin
- zerspanungsmechanikerin
- gießereimechanikerin
- industriemechanikerin
- elektronikerin
- mechatroniker
- maschinenbau
- elektrotechnik
- vertriebsmanagement
- wirtschaftsingenieurwesen
- informatik
- angewandteinformatik
- produktionundlogistik
- ferienjob
- praktikum
- schülerpraktikum
- ferienpraktikum
- praktikumferien
- bogypraktikum
- bogy
- bors
- borspraktikum
- oib
- oibpraktikum
- gymnasium
- realschule
- hauptschule
- gemeinschaftsschule
- berufsorientierung
- schnuppertag
- kirchardt
- sinsheim
- badrappenau
- neckarsulm
- badwimpfen
- lidl
- lidlschwarz
- eppingen
- heilbronn
- kraichgau
- unterland
- ausbildungsmesse
- vocatium
- redblue
- jobstart treff eppingen
- jobstart
- orientierung
- ausbildungsfinder