VA-L 350 und VA-L 560VA-L 350 and VA-L 560VA-L 350 et VA-L 560
Home  >  Products / Services  >  EISELE Circular Saws  >  Automatic Circular Saws for Aluminium and NF Metals VA-L  >  VA-L 350 and VA-L 560

VA-L 350 and VA-L 560

Short processes in sawing operation

Key features of the series are the robust design, state-of-the-art drive technology used in the feed axis and main drive system, and the extreme rigidity of the ultra-precise saw spindle bearing. The result: an optimized, low-vibration cutting process providing extreme cutting output, excellent surface quality and maximum availability.

Pneumatic or hydraulic clamping

You have the choice between a pneumatic clamping fixture for gentle clamping and a hydraulic alternative for greater power when processing predominantly solid material. For parallel cuts, both systems are able to cope easily even where a slight torsion exists in the material.

Two feeding systems

The frequency-controlled main drive system offers scope for adjusting the cutting speed to the sawing process so that both high-strength Al-Si alloys and thin-walled pipes and profiles can be sawn. Two saw feed systems are available: Hydraulic as standard and servo motor-controlled feed as a high-performance option.

Technical Data

Model   VA-L 350 NC1 VA-L 350 NC2
Downfeed system   hydraulic servo drive
Cutting range   90° 90°
Saw blade standard Ø [mm] 350 350
Round [mm] 115 115
Rectangular [mm] 200 x 70 200 x 70
Square [mm] 105 x 105 105 x 105
RPM [min-1] 800 - 4200 800 - 4200
Drive power [kW] 15 15
Feeding length single stroke [mm] 970 970
Max. feed rate [mm/sec] 800 1000
Dimensions L x W x H
without tunnel on infeed side
[mm] 1925 x 2660 x 2740 2460 x 2550 x 1850
Weight [kg] ca. 1250 ca. 1550
Model   VA-L 560 NC1 VA-L 560 NC2
Downfeed system   hydraulic servo drive
Cutting range   90° 90°
Saw blade standard Ø [mm] 560 560
Round [mm] 200 200
Rectangular [mm] 300 x 150 300 x 150
Square [mm] 170 x 170 170 x 170
RPM [min-1] 800 - 3200 800 - 3200
Drive power [kW] 26 26
Feeding length single stroke [mm] 970 970
Max. feed rate. [mm/sec] 800 1000
Dimensions L x W x H
without tunnel on infeed side
[mm] 2200 x 2650 x 2740 2460 x 2550 x 1850
Weight [kg] ca. 1800 ca. 2100

PARTICULARITIES

Saw feed servo drive controlled (optional)
The servo rocker defines a whole new performance class capable of achieving significantly higher cutting outputs with a constant saw feed rate. An additional efficiency benefit: minimized downtime due to precise positioning of the saw head at the material.
Saw feed servo drive controlled (optional)
Flexible material clamping
Extruded profiles with complex geometries pose something of a challenge it terms of clamping. To prevent localized stress resulting in marks on the material, and to ensure optimum handling, the use of specially adapted shaped jaws is recommended.
Flexible material clamping